Bore Water TreatmentIf you have a water problem, we have the solution! We can ensure your bore water can be utilized in many situations. Contact Us
Bore Water Treatment – Water Softener
Pristine Water Systems are the specialists in water management systems with more than 10 years of research and development. If you have a water problem, we have the solution! We can ensure your bore water can be utilized in many situations.
Bore Water is ground water that has accumulated in under ground aquifers. It results from seepage of surface water through layers of soil and rock to eventually settle as subterranean pockets of water – referred to as aquifers. Some travel for many kilometers with many providing the only source of water for regional communities throughout Australia. Aquifers are most commonly tapped into by the sinking of a bore – some are located relatively close to the surface, many deep below. By definition, ground waters often contain particles of substrate and/ or pollutants with which they’ve been in contact – often for long periods of time.
Choosing the right water correction system for your needs is as simple as contacting us.
Do you experience any of the following?
- Bad smelling water
- Bad tasting water
- Discoloured water.
Our solutions include…
- Water filtration
- Tank cleaning
- Iron removal
- Tannin removal
- Water softening
Typical bore water problems include:
- Staining. (Iron and manganese)
- Low pH. (Acidic compounds)
- Excess hardness. (Calcium/ magnesium salts)
- Colour. (Iron, manganese and tannins etc)
- Sediment. (Oxidised iron/ manganese and/ or dirt/ mud etc)
- Salinity. (Salt)
- Chemicals. (Chemical pollutants)
- Bacteria. (Coliforms etc)
Treatments / Recommendations
The first essential steps in successful bore water treatment are:
- Identify the type of water to be treated.
- Identify the water purpose for use and volume required.
- Perform a water test to determine what – if any – problems are likely to be encountered if you use this water.
Pristine Water Systems offers an accredited water testing service by an independent water testing laboratory. Tests are carried out for a variety of indicators including pH, salinity, hardness, metals content, chemical pollutants etc. Additional microbiological (bacteria) testing is also available.
When the tests results are completed, we then provide you with a comprehensive advisory service at which time we will explain to you any problems – if any – that have been identified. We also discuss with you, obligation free, recommendations for the water correction.
To begin with, we will arrange for a sample to be collected for testing. At this point we will also enquire as to the intended use of your ground water together with a guide as to its likely usage volumes.
Pristine Water Systems are ground water treatment experts. For your health’s sake and to ensure that you don’t waste money on inappropriate treatments, check with us first regarding water testing and ground water treatment options.