Pristine Water Systems are the specialists in water management systems with more than 10 years of research and development. If you have a water problem, we have the solution!
We can ensure your spear water can be utilized in many situations. There are subtle differences between Bore Water correction and Spear Water correction; specifically associated with location.
Choosing the right water correction system for your needs is as simple as contacting us.
Spear Water Treatment
Spear water is generally found in sandy coastal areas of Australia and is commonly found closer to the surface than bore water. Spear waters also form in subterranean pockets but unlike bore water can be tidal, as a result water quality may in some cases may vary seasonally, such as seasonal increases in salinity levels. Spear water can commonly be accessed by digging a just few metres below the surface.
Like bore water, spear water can also contain stain causing metals, organic tannins, excess salinity, hardness and colour etc. While some treatments are common to both, specific spear water treatments should take into consideration seasonal water quality variations and other defining differences.
Typical spear water problems include:
- Staining / colour. (Iron and manganese / tannins)
- Low pH. (Acidic compounds)
- Excess hardness. (Calcium/ magnesium salts)
- Sediment. (Oxidised iron/ manganese and/ or dirt/ mud etc)
- Salinity. (Salt)
- Chemicals. (Chemical pollutants)
- Bacteria. (Coliforms etc)
The first essential steps in successful spear water treatment are:
- Identify the type of water that is to be treated – bore or spear
- Perform a water test to determine what –if any – problems are likely to be encountered if you use this water.
Pristine Water Systems offers an accredited water testing service by an independent water testing laboratory. Tests are carried out for a variety of indicators including pH, salinity, hardness, metals content, chemical pollutants etc. Additional microbiological (bacteria) testing is also available.
When the tests results are completed, we then provide you with a comprehensive advisory service at which time we will explain to you any problems – if any – that have been identified. We will also discuss you with obligation free recommendations for their correction.
To begin with, we will arrange for a sample to be collected for testing. At this point we will also enquire as to the intended use of your ground water together with a guide as to its likely usage volumes.
Pristine Water Systems are ground water treatment experts. For your health’s sake and to ensure that you don’t waste money on inappropriate treatments, check with us first regarding water testing and ground water treatment options.
Do you experience any of the following?
- Bad smelling water
- Bad tasting water
- Discoloured water.
Our solutions include…
- Water filtration
- Tank cleaning
- Iron removal
- Tannin removal
- Water softening
Contact us for more information!